動画をゆっくりにしたい方は画面上の３つ丸が並んでいるボタン（または歯車マーク）から再生速度を調節してください。 You can select playback speed by clicking the three dots button at the top right (or the gear icon at the bottom right for PC) 😉 3個目のつなぎ方は以下のビデオで見てください。残りも同じ様につなげます。 a video for how to joint the third block↓ Repeat the same for the lest. ruclips.net/video/7z7g1Edkkhc/видео.html
Guys, people who are saying that this is hard, your right! It is hard. But you must know that you may be unsuccessful doing this. But if you try again and again and again, you will make it. It took me 6 tries but I got it because I was trying again and again.
10.5 x 7.5 is perfect. Since 10.5 x 7.5 was too small for the tutorial, from 2:27, I used 15 x 10.5. (You can turn English subtitles on from setting button on the video) .
Start with an A4 size (29.7 cm x 21 cm) paper. Then divide it into 8 (7.43 cm x 10.5 cm) pieces 1:07. But any size is OK, if the ratio is 1:1.4. "Characters" you mentioned about are the subtitles on my video? Yes, it's Japanese.
Could you purchase the book at Amazon global Japan. www.amazon.co.jp/b/?node=3534638051 Put "Sweet Paper" in the search box and you would see the book. Thanks💕
Question: first cut the 1:1.4 ratio into 8 equal pieces. 6 for blocks. 1 cut into 4 for hinges, how many hinges pieces 6? (Video shown only 4). Should I cut the last piece into 4. 2 for hinges (keep the 1/2 for lock a larger size?). I have to stop before the last block to be connected for questions. I am exciting because my paper size trial seems OK to work on good Origami paper. Patiently and happily waiting.
Sweet Paper - you need not say sorry, you are for many people? 6 hinges OK, the lock piece same size of the hinges or double? Will do it tomorrow. Many thanks.
Sweet Paper - thanks for every thing. It is done after I reconnected over and over the last hinge w/o watching your video, I went ahead inserting the last hinge best way that I could but still doubting about what I had done, your video proof it. An expensive experience 😉😆😂
You can put two types of cube inside: one is to make the same transforming cube with 10% smaller paper, the second one is to make "Yoshimoto cube No.2" ruclips.net/video/8PkIZX6Vmc4/видео.html (also with 10% smaller paper)
The instructions are slightly incorrect. In the english written instructions it ssys your need four connectors, but you actually need SIX connectors. Apart from that, good stuff.
Yes, each block has one hinge (because you need 6 blocks and 6 hinges to make the cube). But when you connect the blocks, look like a block has 2 hinges 9:19. Sorry, may be it's too late.
簡単で分かりやすいコチラをぜひご覧ください！Be sure to check out the new, easier version! ruclips.net/video/Xtego9QXmLs/видео.htmlsi=bsccxS_ON3o9I-wP
動画をゆっくりにしたい方は画面上の３つ丸が並んでいるボタン（または歯車マーク）から再生速度を調節してください。
You can select playback speed by clicking the three dots button at the top right (or the gear icon at the bottom right for PC) 😉
3個目のつなぎ方は以下のビデオで見てください。残りも同じ様につなげます。
a video for how to joint the third block↓ Repeat the same for the lest.
ruclips.net/video/7z7g1Edkkhc/видео.html
H
Guys, people who are saying that this is hard, your right! It is hard.
But you must know that you may be unsuccessful doing this.
But if you try again and again and again, you will make it.
It took me 6 tries but I got it because I was trying again and again.
AirborneHades1000 you are correct!
Lppoji9gi9bi9bub89yb977y
10000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000%correct!!!!
とても参考になりました。いつも楽しみに拝見しています♬
Great use of paper- thanks for sharing; excellent instruction/demonstration.
Wow amazing sweet paper. I appreciate your works. I just love it. thanks 😗😘
It transform so cool I find some origami like this along time and then the legendary one came you got a new subscriber!!!
amazing work! sadly I think it might be a complex one to attempt even though I've been doing origami for 4 years
Thanks. I hope you will try someday🙂. Actually, it's not that difficult, I think.
I FINALLY MADE IT! Thank u so much Sweet paper ♥️
Amazing! Even if I did origami for 6 years I finally made it on my tenth try!
Thanks sweet paper I was searching for a method to make this kind of cube with paper but no youtuber did it except you thanks so much
I love your all things origami paper art
Hi and thank you, Sunder Sunder.
Can you tell me the size of your a4 sheet after you cut it from bottom please
I can now fit all three together!
I appreciate you for making this video .
My A4 paper size was 29.7 & 21.1 but when divided into 8 parts each reqtangle size was 10.5 & 7.5
Can you tell me why and what to do now
10.5 x 7.5 is perfect. Since 10.5 x 7.5 was too small for the tutorial, from 2:27, I used 15 x 10.5. (You can turn English subtitles on from setting button on the video) .
@@SweetPaper ok thank you very much
Wow I love it
Very good thumbnail
what're the dimensions of the paper for both sets of units, and also are these Japanese characters (curious, I'm beginning to learn some myself)
Start with an A4 size (29.7 cm x 21 cm) paper. Then divide it into 8 (7.43 cm x 10.5 cm) pieces 1:07. But any size is OK, if the ratio is 1:1.4. "Characters" you mentioned about are the subtitles on my video? Yes, it's Japanese.
@@SweetPaper thankkkkkkk you very much
Thank you. Again. Thank you.
Guau exelente
Sweet paper where can i find the book
Could you purchase the book at Amazon global Japan.
www.amazon.co.jp/b/?node=3534638051
Put "Sweet Paper" in the search box and you would see the book.
Thanks💕
chơi chán thì tặng mình nhé😊
Awesome 😎 👏
Easy😊
Question: first cut the 1:1.4 ratio into 8 equal pieces. 6 for blocks. 1 cut into 4 for hinges, how many hinges pieces 6? (Video shown only 4). Should I cut the last piece into 4. 2 for hinges (keep the 1/2 for lock a larger size?). I have to stop before the last block to be connected for questions. I am exciting because my paper size trial seems OK to work on good Origami paper. Patiently and happily waiting.
As you wrote, you'll need 6 hinges. Sorry for keep you wait, and you might have finished already😅
Sweet Paper - you need not say sorry, you are for many people? 6 hinges OK, the lock piece same size of the hinges or double? Will do it tomorrow. Many thanks.
For the lock, you will use the leftover piece as whole, the double size of the hinges. Have a good night😴
Sweet Paper - thanks for every thing. It is done after I reconnected over and over the last hinge w/o watching your video, I went ahead inserting the last hinge best way that I could but still doubting about what I had done, your video proof it. An expensive experience 😉😆😂
@@SweetPaper wait left over the big one or the little ones?
Thank you this so cool
Hard!
You're good at it"
How do you put a smaller cube inside?
You can put two types of cube inside: one is to make the same transforming cube with 10% smaller paper, the second one is to make "Yoshimoto cube No.2" ruclips.net/video/8PkIZX6Vmc4/видео.html (also with 10% smaller paper)
The instructions are slightly incorrect. In the english written instructions it ssys your need four connectors, but you actually need SIX connectors. Apart from that, good stuff.
Bien explicado
would it be a good idea to put the cube under water and let it dry to make it stronger ?
I've never thought of it but It's an interesting idea. I want to know if you get a nice result🤔.
i will try when i will have motivation and i'll tell you it
it failed
i've try again and i succeded to wet it. Do you have snapchat ? I could share you the result of this water folding
ok i did it now it's a lot stronger .When you wet it just be really careful it can breaks easily
A bit hard but I can work with it. =)
That's amazing 😉!
日本人ですか?? :)
ありがとう！はい、日本人ですよ。
can i use a 10x14 paper
Yes, you can 😊
Yes, any A size paper.
Can i use a5 paper?
yes, you can
Sweet Paper will it be too small yo asemble?
Is it very hard to assemble?
Have you tried already😮? It would be a tiny cube, but not impossible, I think. Use thin paper, otherwise use 2 sheets of A5, divide in 4 each.
2:26
Hood i think you should give the template of the paper that you showed in the original transforming cube
can you show how to connect all of the cubes
each block has one hinge right?
or two?
Yes, each block has one hinge (because you need 6 blocks and 6 hinges to make the cube). But when you connect the blocks, look like a block has 2 hinges 9:19. Sorry, may be it's too late.
that still doent answer how to connect them
How to connect is from 8:08 (you watched already?). Please tell me at what time you are not clear.
yes i did i need to know how to connect after that, because there is no hook to connect it to
OMG THIS IS SO COOL!!!!! By the way you earned another sub:)
Wowwwww
Actually me occurrenced my channel
But you're right
1:1.4 should result in 21cm x 29.4cm not 29.7 cm!
You are right ! 1 : 1.41... would be more exact ratio. But you can make it with A4 as well as other paper in 1:1.4 🙂
wow
Plying?
First
いつも面白い折り紙動画をありがとうございます :D
当方コピー用紙を使いましたが、どうしてもジョイントがバラけるのでノリづけして折りました!折ったあとも楽しい折り紙最高です(´∀｀*)ｳﾌﾌ
ジョイントは私の場合、とれそうでとれない感じなのですが、ノリづけした方が安心して遊べるかもですね😋
this is so hard
nice (:
So hard!
Can you come to my home and make it for me, please?
I wish I could 😥. If you're stuck at a particular part, please tell me the time. I'd like to explain more clearly.
When I want to joint the 3
Hi
No it's not
i want easy
Sorry, it cannot be easier 😥
Non-Origami versions might be easier:
ruclips.net/video/Kg3_gLO-reE/видео.html
ruclips.net/video/rFEc203-tig/видео.html
Too hard
q
6:21